What Is The Reason For Computer Monitors With Water Ripples?

- Aug 17, 2019-

What is the reason for computer monitors with water ripples?

"What is the reason for the computer monitor to have water ripple?", some netizens asked Xiaobian this question, so Xiaobian summarized the information about the computer monitor with water ripple jitter, and now share it with everyone.

1. Electromagnetic interference. The most common possibility is that the notebook will be shaken when it is connected to the power supply, and it will be fine without the power supply. This is generally more common in industrial power, you only need to replace a power adapter or cut off the ground wire of the power plug;

2, the impact of electricity. In this case, the socket that you pick up from the computer is caused by charging water to cook or using a high-powered electric device such as a washing machine. This is very simple, you can not pick up these devices;

3. Magnetic field effects. If your audio power is large and the anti-magnetic function is weak, it is easier to put it on the side of the monitor. At this point, just keep away from the magnetic field;

4. The resolution is wrong. It is also common for a resolution that is not supported by the display to cause this problem. Generally, you only need to change back to the correct resolution, but the current display generally has the "AUTO" automatic adjustment function, press this button once;

5, graphics card problem. If it is a desktop computer and uses a discrete graphics card, the graphics card will be shaken or damaged. At this point, only need to insert or replace the display should be OK;

6, the drive is wrong. This problem is also likely to occur if the hardware driver is not correct. At this point, you can right-click "My Computer", select "Manage", and then select "Device Manager" to see if there is an item with an exclamation mark. If not, replace it with "Display Card" or "Monitor". Drive

7, the host itself. Host reasons can not be ignored on poor quality chassis, such as poor routing to guide interference. This problem can be tested by replacing the host. The best solution is to install a discrete graphics card.

8, the connection line problem. The inferior cable has no shielding function, and the power cord accessory is extremely susceptible. Even if there is no such influence, the inferior cable itself may cause this problem. At this point, you are OK to replace the cable;

9, the display is aging. This is the last thing you want to see, but if you have not solved it through the above methods, and you change the other monitors, you should check if the monitor is aging;